Too Much Goop ? No Way!!!
Following yet another contractor visit that didn't really fix the problem I discovered that the scuppers are actually constructed from two layers of sheet aluminium.
The hole cut on the top / lid of the scupper went through two layers of sheet, creating a marvelous opportunity for a leak when pressurized in a flood circumstance. This orifice was not caulked. It could only be seen from below when looking "back up" the scupper. Pain in the neck, literally.
Half a tube later its all fixed.
"Trem Seal S" is a silicon based sealant, very sticky for the first couple of days.
Ever onward!
No comments:
Post a Comment